Application
1. Shake well before use.
2. Then spray a thin coat of foam onto the surface to be cleaned. Do not treat only the contaminated area. Instead always treat the entire surface.
3. Allow to act for 2 – 5 minutes, depending on the degree of contamination.
4. Then rub in using brush in order to remove dirt.
5. Wipe off residues with Microfiber Cloth (part no. 1651) or, if very heavily contaminated, with a moist sponge (distilled water). Repeat the procedure until no more contamination is absorbed.
6. Then allow to dry and vacuum.
Other information
In order to avoid any differences in color and contrast between treated and untreated areas, the application should always be carried out on the complete surface.
